2-way floor standing loudspeaker. The enclosure is rear ported and tuned to 36-37Hz.
Mass loading is incorporated using cement and steel plate in a seperate chamber.
H 950 mm W 198 mm D 336 mm
Weight 28.5 Kg each
HF driver is a SEAS 27mm Sonolex precoated fabric dome from the Prestige series.
LF driver is a SEAS 6,5 inch coated paper cone from the Prestige series.
All drivers wired in positive phase.
Crossover filters are 1st order on both HF and LF circuits.
Components wired point to point using silver solder.
Jantzen 4N air core 3% tollerance inductors.
ClarityCap 1% tollerance capacitors.
Mundorf M-resist Supreme 2% tollerance high power resistors.
Crossover point 2.6 KHz
Speaker terminals support single wire, bi-wire and bi-amping using bare wire, spade or 4mm plugs
In-room response typically 29Hz to 25Khz
Sensitivity 87dB 1watt/1 meter at 1KHz
Minimum impedance 7 ohms@ 150Hz
Recommended amplifier power 20 W - 150 W
Supplied accessories. 8 x M10 bespoke spikes with 8 x spike shoes. Spirit level and level adjustment rod. 4 x bespoke link wires with spade terminals.